Digital Explorer
 |
 USB adapter interface AUX IPOD iPhone Droid Bluetooth Ford Lincoln MercuryFRDU2  US $139.99
|
 Garmin GPSMAP 740s Chartplotter GMR18 HD Radar Combo US $2,319.00
|
 Magellan Triton 500 GPS Receiver US $61.00
|
 GPS Bundle Waterproof Hiking Magellan Triton 500 Car Adaptor Case Topo Deluxe US $210.00
|
 Magellan Triton 400 GPS Receiver Adventure Pack with Vehicle Power Adaptor NIP US $120.00
|
 MCX Antenna Active Gain for Garmin Colorado 300 GPS NEW US $.99
|
 NEW Magellan Triton 400 GPS Receiver WATERPROOF BRAND NEW IN BOX GEO TRACKING US $80.00
|
 Garmin GPSMAP 546s BRAND NEW PN 010 00774 01 US $869.00
|
 OFFICIAL LAPTOP MARINE DIGITAL GPS CHART PLOTTER NAVIGATION SYSTEM WITH AIS US $15.78
|
 Magellan Triton 400 Handheld GPS Adventure PackBundle SD card Maps Case NEW US $99.95
|
 GARMIN GPSMAP 740S GPS CHARTPLOTTER BUNDLE W DUAL FREQ TRANSOM MOUNT TRANSDUCER US $1,499.99
|
 Garmin nüvi 255W 43 Widescreen Portable GPS Navigator US $179.98
|
 Magellan Triton 400 ADVENTURE PACK Portable GPS Receiver US $119.99
|
 Mini GPS Receiver Location Finder Keychain Free gift Bicycle amount US $34.49
|
 THE OFFICIAL LAPTOP MARINE DIGITAL GPS CHART PLOTTER NAVIGATION SYSTEM BASIC US $7.88
|
 NEW Microsoft Streets and Trips 2008 GPS LocatorTraffic US $29.99
|
 High Gain GPS Antenna for ATT 3G Microcell Sprint Airave Airvana Femtocell US $23.99
|
 Garmin Gpsmap 541s GPS Receiver Brand New in the Box with Transducer US $680.00
|
 Garmin iQue M5 GPS Receiver Pocket PC US $32.76
|
 Magellan Triton 400 GPS Receiver bundle with Case Software USB Cable SDcard US $149.95
|
 New Waypoint LPMNC10 Lakemaster ProMap MINNESOTA Ver 61 GPS SD DIGITAL CHART US $99.99
|
 Magellan Triton 400 GPS Adventure Pack bundle TOPO softwareSD cardcasebatt US $85.00
|
 GPS CASE FOR NAVIGON 40 42 Premium Plus Easy 6300 6310 6350 LIVE 2510 Explorer US $8.99
|
 GARMIN GPSMAP 541 GPS CHART PLOTTER US $589.25
|
 Lowrance Hds 5 Base Us W o Ducer 140 32 US $520.99
|
 Mini GPS Receiver Location Finder Keychain MINI GPS wholesale US $29.69
|
 iSimple ISFD571 Gateway iPod iPhone Aux Audio Input Interface Ford Lincoln US $110.00
|
 GARMIN GPSMAP 441S W TRANSDUCER PN 010 00766 01 US $474.00
|
 BRAND NEW Magellan Triton 500 GPS Receiver Unit IN BOX COMPLETE Hiking US $122.95
|
 Remote GPS Antenna for Garmin Nuvi 770 775T 780 785T US $22.96
|
 GPS Antenna for Garmin StreetPilot 2610 2620 2650 2660 US $9.60
|
 Magellan Triton 300 Handheld GPS Navigator Unit Portable Waterproof Hiking A US $66.49
|
 USEFUL Mini USB Real Time Spy GPS Tracker Tracking Device Mini GPS tracker US $29.99
|
 Mini GPS tracker with Bicycle Amount Yellow color US $34.99
|
 Garmin Gpsmap 740s Gps Chart Plotter Sounder Coastal Charts 010 00835 03 US $1,499.99
|
 140° Dual Lens Car Dash Camcorder DVR 27 TFT LCD Video Recorder G Sensor GPS US $98.79
|
 Scangauge E OBD II Fuel Economy Computer SHIPS FREE Scanguage Scan Guage Gauge US $96.95
|
 Car GPS Tracker CCTR 800 Waterproof Shock Sensor Data logger Realtime Tracking US $89.88
|
 Garmin GPSMAP 740 GPS Chartplotter US $1,399.99
|
 GPS Antenna for GARMIN GPSMAP 60 60C 60CS 60Cx 60CSx US $5.99
|
 iSimple iPod iPhone and Auxiliary Input Ford Lincoln Mercury Vehicles ISFD571 US $112.95
|
 D900 OBD2 Live PCM Data Code Reader Scanner CAN Protocol Car Diagnostic Hot USB US $48.88
|
 Magellan Triton 2000 GPS Receiver US $225.00
|
 New GPS Antenna for Garmin StreetPilot 7200 7500 2820 US $22.96
|
 Ford F150 Mustang Explorer Edge Mercury Montego Radio car dvd GPS Headunit US $459.00
|
 Garmin GPSMAP 740S Marine GPS Chartplotter w Sounder with warranty 010 00835 03 US $1,199.00
|
 GARMIN GPSMAP 541S GPS CHART FISHFINDER W TM XDUCER US $713.88
|
 GPS Antenna for Lowrance iFinder H2O H2O C PRO PhD US $22.96
|
 New GPS Antenna for Garmin GPS 60 GPS 76 GPSCOM 170 US $22.96
|
 Powerful Amplified GPS Antenna for Garmin Quest Quest 2 US $22.96
|
 Mini GPS Tracking Device Mini GPS tracker with Bicycle Amount US $34.99
|
 USEFUL Mini GPS Tracking Device Mini GPS tracker with Bicycle Amount US $34.99
|
 Cables To Go 28734 Toslink Digital Audio Selector Switch US $23.39
|
 Magellan Triton 500 Handheld GPS Portable Receiver US $131.25
|
 Ford Mustang Car Alarm Remote Starter Install Guide US $6.49
|
 Digital Yachat ZDIGWLN10HS Digital Yacht NMEA to Wireless Wi Fi Adapter 38400 US $305.23
|
 Garmin 010 00762 02 Garmin GPSMAP 541S Chartplotter Fishfinder Combo w o Transdu US $719.20
|
 Magellan Triton 400 Adventure Pack Bundle Handheld GPS Receiver TOPO Carry Case US $84.95
|
 Remote GPS Antenna for TOM TOM ONE 2nd Edition ONE XL US $22.96
|
 Remote GPS Antenna for TOM TOM GO 930T GO 920T GO 910 US $22.96
|
 New GPS Antenna for Garmin StreetPilot i5 i3 i2 c330 US $22.96
|
 Powerful GPS Antenna for Garmin Nuvi 5000 650 660 670 US $22.96
|
 9ft Advanced GPS Antenna for Garmin GA 25 MCX 010 10702 00 GA 27 010 10052 05 US $49.99
|
 2005 2006 2007 2008 2009 2010 Ford F150 iPod Adapter US $129.00
|
 Mini USB Real Time Spy GPS Tracker Tracking Device Mini GPS tracker US $29.89
|
 NEW Magellan Triton 500 Handheld GPS Receiver Color Screen Waterproof Hiking US $184.99
|
 $200 Rebate Garmin GPSMAP 740S GPS Chartplotter Model 010 00835 03 US $1,499.99
|
 Garmin GPSMAP 720 GPS Chartplotter US $1,299.99
|
 Garmin GPSMAP 740S GPS Chartplotter w Sounder US $1,499.99
|
 GARMIN GPSMAP 5212 RADAR PACK WITH GMR 24HD US $5,633.31
|
 Garmin GPSMAP 5212 GPS Receiver US $3,090.00
|
 Garmin GPSMAP 4212 GPS Receiver US $2,199.99
|
 GARMIN GPSMAP 546 GPS CHART PLOTTER US $899.99
|
 GARMIN GPSMAP 740 GPS CHART PLOTTER W COASTAL CHARTS US $1,300.00
|
 Garmin GPSMAP 441 GPS Receiver US $499.99
|
 Garmin GPSMAP 4208 GPS Receiver US $1,750.00
|
 Garmin GPSMAP 5208 GPS Receiver US $2,600.00
|
 GARMIN GPSMAP 720 GPS CHART PLOTTER US $1,300.00
|
 GARMIN GPSMAP 541S GPS CHART FISHFINDER W TM XDUCER 010 00762 01 US $751.36
|
 Digital Yachat ZDIGWLN10 Digital Yacht NMEA to Wireless Wi Fi Adapter 4800 Bau US $282.62
|
Installing a Tabletworks driver for a GTCO Digitizer
Installing the Tabletworks Driver for your GTCO Digitizer
Today we will be installing the GTCO digitizer driver. That driver is named Tabletworks.
We can install the Tabletworks driver either from the installation CD or by downloading it from the GTCO website.
* Installing Tabletworks from the Tabletworks CD *
To install it from the Tabletworks installation CD:
1. Insert the CD into the disk drive on your computer. After a few moments the installation menu will appear.
2. Click the "Install Tabletworks" button to start the Tabletworks installation.
3. After a few moments the Tabletworks installer Welcome Screen will appear. Click the [Next] button.
4. Then click [Yes] at the License Agreement Screen.
5. For the "Installation Type", leave it as "Complete" and click the [Next] button.
6. The next screen informs you that you may see the Add New Hardware Wizard after the installation is complete. This is very unusual in our experience. Click the [Next] button on that screen.
7. If you are installing over an older version of Tabletworks, the Tabletworks installer will warn you that it will overwrite the previous installation. Please click the [Continue] button.
8. The Tabletworks driver will then install.
9. At the final screen, click [Finish].
10. Then close out of the Tabletworks installation menu by clicking the exit button in the lower right-hand corner of the menu.
* Downloading the Tabletworks driver *
If you don't have a Tabletworks installation disk or you'd like to download the newest version, you can easily download it from the GTCO website.
To download the Tabletworks driver:
1. Start your Internet browser (i.e. Internet Explorer, Firefox or Safari).
2. In the address bar type www. GTCO.com and press enter.
3. At the GTCO website click the "Technical Support" button on the silver menu near the top of the screen.
4. Select "Large-format digitizers" from the pulldown menu.
5. At the next screen, scroll down to the bottom of the page and click GTCO CalComp graphic in the lower left corner that page.
6. At the next screen click the "Drivers and software downloads" link. That will take you to the drivers and software download page.
7. On the Drivers and Software Download page, the fourth column over is the download column.
8. You can click on the first link in this column. As of the writing of this article the latest Tabletworks driver was TW-10.09.0024. The Tabletworks drivers are updated every few months is a good idea to download the newest version.
9. Download the Tabletworks driver, and save it somewhere on your hard drive.
10. To start the Tabletworks installation, double-click the file you just downloaded and follow the Tabletworks installation instructions above starting with Step 3.
* Plugging in the GTCO Rollup III Digitizer and testing Tabletworks *
Once the Tabletworks drivers installed, you can plug in the digitizer USB cable. Once the cable is plugged in the board will give a double beep as is powers on and the Tabletworks driver should automatically detect the digitizer.
* Plugging in the GTCO Rollup I or II Serial Digitizer and testing Tabletworks *
Once the Tabletworks drivers installed, you can plug in the digitizer serial cable. Once the cable is plugged in, right click the Tabletworks Icon in the System Tray and select "Restart Tabletworks". The Tabletworks driver should automatically detect the digitizer.
* Checking the Operation of the GTCO Rollup Digitizer *
You can check the operation of the digitizer by placing the stylus or cursor on the surface of the board and moving around. As you move the stylus or cursor on the digitizer, the mouse pointer should match your movements on the screen. If it does not, restart your computer and test it again. If it still does not work, then see our troubleshooting section.
* Configuring the Tabletworks driver *
Next we'll need to open up the Tabletworks Control Panel and change some settings to make the operation of the digitizer more reliable.
To open the Tabletworks Control Panel, either find the Tabletworks icon in the System Tray in the lower right corner of the screen (near the clock) or open the Tabletworks Control Panel from the Programs Menu.
* Enabling Wintab *
Once the Tabletworks Control Panel is open you'll see your digitizer listed in the upper portion of the Control Panel. You will also see three checkboxes after the name of your digitizer. Make sure that both Mouse and Wintab boxes are checked. The Tabcon box should be left blank unless you are explicitly told to enable it by your software vendor. If you enable both the Tabcon and Wintab options, the digitizer may not operate properly.
* Specifying a Cursor *
Then down toward the center of the dialog box, click the "Specify a cursor" checkbox and then select either a stylus or a 16 button cursor from the pulldown list below.
Next, click on either the "Stylus" tab or "16 Button Cursor" tab depending on whether you have a stylus or 16 button cursor. On that tab, change the Mouse Mode to "Relative". If the mouse mode is left on "Absolute" and the digitizer stylus or cursor is left on the digitizer, it will automatically snap the mouse pointer to the corresponding position on the screen when you're working in non-wintab programs. That is very annoying.
Your Tabletworks is now ready to use.
About the Author
I'm Dr. Digitizer.
I've spent 19 years setting up, installing, and troubleshooting GTCO digitizers.
I've learned everything about GTCO digitizers and especially GTCO Rollup digitizers and I'm sharing all that information with you, the befuddled user. For while I have years of experience and can answer digitizer question, in detail, while wide awake, half asleep or heavily concussed... you, as the user, are facing many of these problems for the first time...and well, you have better things to do.
So read on! And TRIUMPH over your digitizer!
And look for more digitizer answers at
www.DrDigitizer.com
All information is copyright, 2009-2010, DrDigitizer, LLC.